The photograph below was taken in the kitchen of a residence in Bedford where the new owner wanted the Ceramic floor tiles deep cleaned before they moved in; you can see for yourself how dirty they had become.
Cleaning Ceramic Floor Tiles
To get the clean Ceramic tiles clean I applied a medium strength dilution of Tile Doctor Pro-Clean mixed 50/50 with NanoTech Ultra Clean with a mop; this was left to dwell on the surface of the tile for around twenty minutes. The next step was to then run over the floor using our high pressure Rotovac machine which applies and removes water at high pressure to remove the soil and rinse the floor at the same time. The Rotovac machines are an expensive investment but they do make Tile Cleaning easier, they are also flexible and can be used for carpet cleaning etc.
This Ceramic tiled family bathroom with shower was installed at house in Leighton Buzzard and was in need of rejuvenation. You can see from the photograph below that the tiles were in reasonable condition but the grout had become ingrained with dirt which is not unknown as the top layer of grout is porous and will discolour over time if not protected.
Cleaning Ceramic Tile and Grout
The Ceramic tiles and grout were treated using a strong 2:1 dilution of Tile Doctor Pro-Clean mixed 50/50 with Nanotech Ultraclean which combines a highly powerful Tile and Grout cleaning product with tiny abrasive particles. For vertical tiled surfaces I recommend the mixture is decanted into a bottle with a trigger spray attachment which when sprayed onto the wall allows the cleaner to mix with air making it lighter and allowing it to stick better. The solution was then worked in using a stiff scrubbing brush by hand before being rinsed off with water; this process was repeated a number of times until we had managed to clean all the areas and then left to dry.
The grout was dried and the sealed with a couple of coats of Tile Doctor Grout Sealer which forms a protective barrier over the porous grout and keeps it looking good for longer. Most sealers can be used on grout (check the label to confirm) but for best results use a spray bottle as mixing the sealer with air improves its ability to stick to a vertical surface.
Refreshing a Ceramic Tiled Bathroom in Leighton Buzzard
The Ceramic floor tiles shown below were installed in a Luton high street restaurant, as you can see they were far from clean, deeply stained and even the grout had gone black.
Cleaning Ceramic Floor Tiles
Given the amount of dirt on the tile and grout we decided to apply a very strong combination of Tile Doctor Remove and Go mixed 50/50 with NanoTech Ultra Clean which results in the creation of a heavy duty stripper/cleaner containing nano sized abrasive particles that can penetrate deep into the dirt. The cleaning solution was left to dwell on the surface of the tile for twenty minutes before using a Rotovac machine which applies and removes water at high pressure to remove the dirt and rinse the floor.
Glazed ceramic tiles won’t take a sealer so once the entire floor was dry and stubborn areas re-done we were finished.